ahs
Comment on May 22nd, 2008.
hi there I have all the above but there is a problem it just says connecting to gps device but nothing happens any suggestions
Adam Dempsey
Comment on May 23rd, 2008.
I’ve installed it, but when I try running TomTom it goes through the setup and then says No Maps Found?
peter
Comment on May 29th, 2008.
i get a certificate error when i try and instal bt.sisx
Aaron
Comment on June 9th, 2008.
I can confirm that this has worked for my N95 8GB (on the second attempt anyway) You need to uninstall any tomtom mobile software you have already, then follow the steps above.
- the 3.tomtom is the acutall installer for the tomtom software, it dosent just modify it to work with your internal GPS.
bull
Comment on June 14th, 2008.
i too confirm it works on n95 (older version without internal memory). Please follow the steps detailed above. for removing the certificate error set date as 16may08. it worked for me. uk and ireland maps availabe on torrent
thankss dave….
Miru
Comment on June 22nd, 2008.
Hi I tried with my n95 8gb and I can’t start. GPSd and bt is on. GPSd cannot get signal from bt. When I start my external antenna then GPSd show me attitude ect.. That is why i think is something wrong with BT program. Meaby somebody have same problem????
entwisi
Comment on July 4th, 2008.
If you get teh certificate error change teh setting in app manager to allow all as oipposed to “Signed only”
I got that error when installing a load of Pizero’s themes untill I did teh above
daniel butler
Comment on July 4th, 2008.
can somebody confirm how too get maps onto this
have got application installed but when going through the setup it says no maps found
plz plz plz help
wan
Comment on July 14th, 2008.
Ave done it step by step twice now and GPSd gets no singal at all
tommy king
Comment on July 19th, 2008.
i have bought a version off ebay and it works a trumps, the seller even helps you with problems. the cheapest iv seen on ebay is 6.50 ebay item number 120284740625 .
Senthil
Comment on July 30th, 2008.
I have the same problem as ahs, Miru, wan. Basically, I have installed BT, gpsd and tom tom. I started the BT software 1st, then GPSd and then tom tom. Tom tom just says connecting to GPS device…. and stays like that…SOMEONE PLS HELP!!!
António Pereira
Comment on July 31st, 2008.
Hey mate, thanks a lot for this. I’ve been searching and searching for so many foruns, etc, and this was the only one that is working correctly. I’m using an external GPS receiver, so dont no yet if internal is working properly, but will try one time to check it.
To Daniel Butler, please visit this: http://www.gforum.tv/board/1505/177832/varios-mapas-tomtom.html -» there’s a lot of maps for TomTom (all countries i think…)
Cheers !
bash
Comment on August 11th, 2008.
I’ve installed it, but when I try running TomTom it goes through the setup and then says No Maps Found?
8nib
Comment on August 23rd, 2008.
If you have problems catching the GPS singnal then watch this on you tube, very simple it works!! Great.
http://www.youtube.com/watch?v=o6Skncda1r0
shoaib
Comment on September 10th, 2008.
Hi there, I’ve got the same problem of gpsd singnals. I’ve repeated installation process many times but just have this problem that gpsd received no signal. Can anybody help me please regarding this.
cheers
elviscrid
Comment on September 12th, 2008.
If your having problems with binda gps picking up a signal, try turning off (or maybe it’s on can’t remember) the bluetooth setting in MENU/TOOLS/SETTINGS/GENERAL/POSITIONING/POSITIONING METHODS I did this and the internal gps picked up a signal in tom tom straight away!
dee
Comment on September 17th, 2008.
Hi
I have same problems. All set up by still no signal? Done the youtube thing but still not working. Anyone out there help? Also, I did start tomtom prior to installing the GPSd.jar can you twll me if this is a big problem and why?
Cheers
Dee
Dee
Comment on September 17th, 2008.
Hello again
I now have tom tom on my N95 8gb using internal gps.
Yipee! just got it all working woop woop! is all sorted out now thanks to you guys.
Ron
Comment on October 14th, 2008.
One thing you must do is be patient,it can take a while
For the GPS signal to be picked up,i was about to give up
And Hey Presto it was there.
Alamjee
Comment on October 21st, 2008.
Hi,
I was also struggling for last few days to get the signals but finaly tomtom is up and running. Just follow the above steps and make sure to goto tools/settings/general/positioning/positioning methods and only enable assisted GPS and Integrated GPS(DISABLE bluetooth GPS and network based). Now open GPSD and wait for signals and hide once u get them and open the tomtom and yes to bluetooth question. Go to Menu then press 5,6,6,6,1. Then press configure , select other BT GPS RECIEVER, then select BINPDA GPS from the appeared list and press done. Then u should b good to go where u want ,using ur tomtom 
Once again thanks for this awesome software and all ur above comments to get this working
wesley
Comment on October 28th, 2008.
ihave installed this many many times and get the same every time, in gpsd app, latitude=0, longitude=0, clients=1, error=none, debug.
i have stood outside for 20mins and still no valid gps signal. i think its just a myth, i have done this on my n73, n95 and n95 8gb and i have encountered exactly the same every single time with multiple installs on each phone
MALK
Comment on October 29th, 2008.
Me too I have installed uninstalled and still got no gps found.
Alam
Comment on November 3rd, 2008.
Wesley have u tried doing “goto tools/settings/general/positioning/positioning methods and only enable assisted GPS and Integrated GPS(DISABLE bluetooth GPS and network based). Now open GPSD and wait for signals”. This is what made mine working
ptecn
Comment on November 9th, 2008.
hi all.
I have managed to setup the tom tom but not receiving any sound. I have checked on the sound menu for tom tom but stll has not been resolved.
Does anyone else had similar problems, and how did you manage to get sound.
Green
Comment on November 10th, 2008.
Finally, It’s working for me now.
Thanks to everyone.
Bleep Bleep
Comment on November 11th, 2008.
Great it works, but when gpsd is ran it uses wap 1kb sent and 4kb of data received every couple of hours, if I try to say no to using network then tomtom will not find gps device. How can I use this without wap usage?
Steve
Comment on November 11th, 2008.
Hi All,
I am having the issue with TomTom just saying “Connecting to GPS Device” and never connecting. Any one found out a solution to this? I have followed all the instructions and played round with it lots but still had no luck. GPSD connects and gets a Lat & Long. Click Hide. Open up TomTom and choose GPSD (I get a option when TomTom opens up) but the little blue tooth symbol next to GPSD option is grey - Should it be blue?
Also tried another install of TomTom and GPSd but with that install when I select GPSD it crashes TomTom. DOH! So I have come back to this slightly better.. but still not working version that just never connects.
Thanks
Steve
Comment on November 11th, 2008.
Also…
To Bleep Bleep.
Look at Alam’s post a couple up and try disable assisted GPS. Maybe that will stop the data usage. Maybe not tho.
Bleep Bleep
Comment on November 12th, 2008.
I have tried switching off “assisted GPS” and tried Alam’s method, but GPSd does not find anything. Does anyone else have this problem mentioned above on my first post.
If everything is switched on other than Bluetooth GPS then it does work.
ARE YOU BEING CHARGED FOR USING GPSD ???????
Have look at your log - and then scroll across and see if data is being sent and received.
Peter
Comment on November 12th, 2008.
guys if you have Garmin or an other navigation software on your phone start garmina(or other software) and then start gpsd. The Garmin will find your position very fast like always and then switch to gpsd where you will see that gpsd has also the position, switch Garmin off and start TomTom. Do the configuration like recommended in this forum and you will get the signal.
The trick is to use the first time a Navigation software which is positioning the gps antenna ins short time. Then you can run the gpsd to read the data from the antenna. Have fun.
You will need only to start Garmin the first or even the second time, later on you will find with gpsd the position in seconds without Garmin.
TOMTOM is GREAT on my N95
Steve
Comment on November 19th, 2008.
Yes, But I think the problem is that TOMTOM says can not find a GPS Device unless you choose yes to Both when starting up GPSD.
Also Found the solution to my “CONNECTING TO GPS DEVICE” issue….. I aquired a different copy of Tom Tom 6.02 software and it started working! Try that if you keep getting the above message when running TomTom.
Martin
Comment on November 21st, 2008.
Help… I have had TomTom 6 working successfully using the internal GPS on my N95 8gb for several months, but have just updated to the latest firmware release (V 30.0.18_23-07-08_RM-320), and now TomTom does not work. I have deleted all folders off my phone, reinstalled it several times with the same problem! When you try to run TomTom all I get is a spinning globe! Any ideas, or has Nokia performed some underhand tweaks to the phone software release?
whiteadder
Comment on December 30th, 2008.
i have done everything but i can’t have signal latitude 0
jelp please
Leave a comment
Comments can contain some xhtml. Names and emails are required (emails aren't displayed), url's are optional.