HOW TO: Install Phoenix

Posted on November 2nd, 2006 by Dave.
Categories: Uncategorized.

I’ve had a lot of requests for this…

What you need:

You can also download the entire package (including this how-to) from this link.

Please be aware of that MyShareFile deletes all uploads after 30 days of inactivity. These files were uploaded on October 20, 2006)

You will also need:

  • To understand written English
  • To read these instructions carefully, and not rush ahead!

Now, with that said, let’s do this step by step…

  1. Uninstall everything related to Nokia from your computer.
  2. Clean out all Nokia related entries in your registry.
  3. Reboot your computer, do not run anything, you would like to have a clean environmant.
  4. Unpack the zip files you downloaded above. Do not unpack the executable rar files!
  5. Install Nokia Diego, that’s done by double-clicking the file Nokia Diego 3.07 Sp2.msi. There’s nothing special about this installation, just run the msi file and answer the dialog boxes. Do not change any paths or anything else, just make a default installation. Do NOT run the application after installation! It will complain about not finding any dongle, we’ll fix that later… In fact, you will most likely never, ever start Diego by itself anyway..

    Now on with the tricky part….

  6. We will now install Phoenix, and this takes some tricks and you need to be a bit careful about what you’re doing, otherwise you won’t succeed.
    1. Start the Phoenix installation by double-clicking the phoenix_service_sw_2006_34_2_156.exe file.
    2. After a moment, you should be greeted by this screen:

      Just click the “Next” button to go on.
    3. The application will now start installing…
    4. After a while you will get an error dialog box telling you that installation cannot continue without a dongle. Of course you don’t have one since you’re reading this..

      Do not click any of the buttons in that dialog yet!

    5. Now, start the installation-time dongle crack by double-clicking the file Nokia Phoenix - Iinstallation-time dongle crack.exe.
      Just start it, do not click that “Install” button yet! Your screen should now look like this:


Here comes the part that needs some special attention. To explain it; the crack consists of a couple off dll files that makes Phoenix believe that there is a dongle attached.
The installer has the original files locked at this point, so they cannot be replaced. This is what makes this step a little tricky.
When the “Try again” button in the installer is clicked, the files are released, and can be replaced before the dongle test is made again.

Here’s how it must be done:

  1. Check the crack installer window so that the “Destination folder” really points to your Windows’ System32 directory. If it doesn’t, edit the line in the window. (If you don’t know what and where that is, you should definately not even try to install this piece of software since you won’t have the competence to use it anyway.)
  2. Arrange the Phoenix installer window and the crack installer window so you can have very quick access to both of them.
  3. Click the Phoenix installer’s “Try again” button.
  4. Within 1-2 seconds, click the crack installer’s “Install” button. The installation should continue, like this;

  5. Sit back and laugh at Nokia’s installation protection.
  6. If the installation did not continue, and you get the “Dongle not found” dialog box popping up again, then you were not quick enough in step 6.e.iii and iv, or you didn’t get the “Destination folder” right.. So, you will have to go back to step 6.e.
  • At some point, the installer component root.exe would like to use your network connection. I haven’t seen any problems with that, and frankly I don’t know what it really wants to check. Anyway, if you have your Windows Firewall active, this will pop up (but in your language);

    I just allowed it, I haven’t even tried denying it to see if it makes any difference.
  • When the installation finish the first step, you’ll be asked if you want to reboot now or later;

  • You must reboot at this point, do not wait, and do absolutely not try to start any of the Nokia applications!
    The installation continues after reboot.
  • After the reboot, all the Phoenix DLL files will be registered with your system before your normal desktop comes up, it take a little while.
  • During the DLL registration, the installer will complain twice that it can’t find the DESkey (that’s the dongle code), looks like this;


    Just click “OK” in these two boxes, and everything will be fine..

  • When this is ready, your normal desktop should show up. Do not try to start Phoenix yet!
  • Now it’s time to install the Phoenix run-time crack, this must be done to be able to start the application. Double-click the Nokia Phoenix 2006 - Run-time dongle-crack.exe file. It should look like this;


    Check that the “Destination folder” is pointing to the correct location, if not, correct the path. Then press the “Install” button.

  • Installation done!
  • Double-click the Phoenix icon on your desktop to start the application.
  • You should now be presented with a login box, like this;

    Press “Maintain” to add a user.
  • In the new box popping up, enter a user name, any name, and initials. In this example, I entered “Steve” with the initials “SN”;


    Click “OK”.

  • You’re done. Enjoy…

    • 45 comments.

    hollow

    Comment on November 16th, 2006.

    installes as stated but doesnt work !! tried to reflash dead nokia n80 and some files are missing from the install guess whos gor a £200 paper weight ?

    Dave

    Comment on November 17th, 2006.

    Hollow - I’d take your phone to your nearest Nokia Service Centre. Say that it won’t turn on and they’ll flash it for you. It’ll be under warranty so it won’t cost anything.

    Tiger

    Comment on November 19th, 2006.

    This safelink … is not working wish if you had upload these files on rapidshare

    Adam

    Comment on November 21st, 2006.

    files seem to have gone any chance they can be uploaded again.

    Thanks poster

    Dave

    Comment on November 22nd, 2006.

    I’ve updated the link to Phoenix. If anyone has links to the other files, please let me know.

    Adam

    Comment on November 22nd, 2006.

    Hi Dave

    Thank you, says that without the dongle itcan’t continue. Do you have it and the other bits needed

    Cheers

    Adam

    Adam

    Comment on November 28th, 2006.

    Does have anyone have the complete set of the above files.

    Thanks

    darkip

    Comment on December 2nd, 2006.

    I found that I could not get Phoenix to launch (Froze at splash screen) on my dual core AMD (XP MCE) yet when I installed it on my single core Pentium 4 (XP PRO) it worked fine. Could either be the processors or the OS.

    NIGHTCD

    Comment on December 4th, 2006.

    The files is offline. some none got an another link for the files?

    Dave

    Comment on December 4th, 2006.

    See the front page for new links.

    Lucio

    Comment on December 18th, 2006.

    Guess all are gettin stuck @ the Runtime dongle crack section…

    Hmmmmm the links on this page seem to be frozen ….

    Dave

    Comment on December 18th, 2006.

    You need to follow the instructions exactly to get past the dongle prompt. As soon as you hit “Retry” in the installer window you need to quickly switch to the crack windows and press “Yes To All”.

    Dave

    Comment on December 18th, 2006.

    Also, I don’t have copies of these files, so if you have a working link, please let me know.

    Lucio

    Comment on December 18th, 2006.

    Hi guyz
    Would be very gratefull if u can send download links…
    Of

    Nokia_Phoenix_Iinstallation_time_dongle_crack.exe
    Nokia Phoenix 2006 - Run-time dongle-crack.exe

    as these links dnt seem to work…

    Malte

    Comment on December 22nd, 2006.

    Thanks man, you saved my day yesterday.
    Had an older version of Phoenix running, tried flashing my 6270 with V3.81 and - who might guess - screwed it up. No life in it any more.
    I did de-installing and installing of old/new software from your manual and made a “flash dead mobile” via USB Ca-53. 10 minutes later it showed vital signs again.
    Thanks and Hej då

    Lucio

    Comment on January 5th, 2007.

    Hey Guyz am doing a dead flash for my Nokia 6280, But am not successfull…

    Get this error —>

    The flashing failed. Do you like to retry the flashing?

    HRESULT 0×8401225a (-2080300454)

    Error :

    Flash: Adl Loader does not start. This may happen if USB has not yet configured, in this case wait USB to configure and restart the operation. In X products this can mean that wrong dcm dll is used.

    In case anyone can help me wud be really gratefull. Have tried all ways out but my phone dead flash jus wont work.

    azz

    Comment on January 13th, 2007.

    hy please please help! i have just heard of this, and have been looking thorugh it all. i am new to this but want my phone to be n80ie. Can someone help me with this through a step by step thing, if they can it would be great my msn addy is azz4eva@hotmail.co.uk if you could add me and help me through it would really appreciate it thnx. (my phone is alive not dead).

    tyler

    Comment on January 20th, 2007.

    hello im with azz said, i have checked out a ton of sites to get diego working, and all these links on here don’t work, can somone please help me,
    thank u
    phoon_sixone@hotmail.com
    add me to msn or an email would be very nice

    BONG GARCIA

    Comment on January 22nd, 2007.

    Guys why is it whenever i click to download on this following link below, it said: “Download link expired or too many downloads”…. huhuhuhu i want to fix my dead N73 so bad… this is due to firmware updates…
    * Nokia Diego v3.07 SP2 (Nokia Diego 3.07 Sp2.msi)
    * Nokia Phoenix 2006 (phoenix_service_sw_2006_34_2_156.exe)
    * Installation time dongle crack (Nokia_Phoenix_Iinstallation_time_dongle_crack.exe)
    * Runtime dongle crack (Nokia Phoenix 2006 - Run-time dongle-crack.exe)

    You can also download the entire package (including this how-to) from this link.

    PLEASE HELP ME GUYSS!!!!

    SImon

    Comment on January 31st, 2007.

    Hi guys, I am just trying to get “phoenix_service_sw_2006_34_2_156″ installed, but I can`t even get through the 1st step of the whole installation…:( It says:

    Starting Installshield Wizard………

    and suddenly:
    An error (-5004 : 0×80041f42) has occured while running the setup.

    Please make sure you finished any previous setup and closed other applications.
    If the error still occurs, please contact your vendor: Nokia Mobile Phones.

    Iam not even getting there, so please help me and give me some advice how to go about stuff like that.

    regards

    Simon

    Cancer_127

    Comment on February 10th, 2007.

    Can any one give me link 4 download all this.
    My e mail is vijaydihora@gmail.Com
    thnx 4 advance

    Matthew

    Comment on February 14th, 2007.

    Hi Dave,
    Sorry to be such a bother, but do you think you can upload or send these:
    Nokia Diego v3.07 SP2 (Nokia Diego 3.07 Sp2.msi)
    Nokia Phoenix 2006 (phoenix_service_sw_2006_34_2_156.exe)
    Installation time dongle crack (Nokia_Phoenix_Iinstallation_time_dongle_crack.exe)
    Runtime dongle crack (Nokia Phoenix 2006 - Run-time dongle-crack.exe).
    to me which ever is convenient to you.

    I have tried using the nss and nsu plus gsm magic method. It worked fine but only to know later that the version i have is n80 and not n80ie.
    So i am going to take my chance to do it using the phoenix way. Any thoughts on this by you will be welcomed.
    Cheers mate.

    ReVan

    Comment on March 17th, 2007.

    I’ve come across a torrent that has the link to the newest versions of the flashing tools. Now Phoenix even supports N95 and E90. You can download the torrent from here which also includes the instructions on installing Phoenix 2007.

    Hope this helps :-)
    http://www.demonoid.com/files/details/1062054/3100888/?rel=1174118791

    ricky

    Comment on March 18th, 2007.

    hi i have just updated my firmware from, v.40623.0.42, rm92(33.01)
    to v4.0632.0.38. i folllowed instuctions and used nss and gsm magic. the whole process took about 30 mins. thankyou so much i am now fid of the o2 branding which cluttered my n80. i will be trying gizmo too. thanks for your help and detailed guide. i will become a very regular visitor to this blog from now on.

    thnks again new n80i owner.

    Usman

    Comment on March 26th, 2007.

    Hi there!
    i was upgrading my N80 software, and in middle i removed the cable. In responce, now the phone set is not operating, i could’nt even switch it on.
    Please can you tell me how to solve the problem
    Thanx
    Usman

    rayanmarley

    Comment on March 30th, 2007.

    Been reading your n80 blog for awhile. I have to admit you did a pretty good job on explaining how to install Phoenix. I have successfully installed Phoenix and now wanted to restore my bricked n80 but now I am having problems particularly Phoenix finding my phone. I’m not so sure about the connection to be used. I have connected the phone via USB but which one to use from the list. I have the product loaded RM-92(seen at the bottom) but from there still says “No Product” beside it. I really need your help! What’s next for me? Btw, I read the help file but still unable to move on. TIA

    Cun Cellular

    Comment on April 30th, 2007.

    http://www.toxiconline.com/freedl/nokia/phoenix_service_sw_2007_4_6_170.rar
    Phoenix Dongle crack (http://www.gsm-magic.com/1-crack_dongle_phoenix_all_.exe)
    Phoenix 2006 crack (http://www.gsm-magic.com/crack_dongle_phoenix_2006.exe)
    Nokia Diego v3.07 Sp2 (http://rapidshare.de/files/32995336/diego307sp2.rar) or http://files.filefront.com//;5568215;/
    GOOD LUCK

    foo

    Comment on May 10th, 2007.

    Anyone know if you can take a nokia e-series from 3.x firmware to 2.x or will that kill the phone?

    Dave

    Comment on May 10th, 2007.

    I’ve heard reports of putting a lower firmware version working, but it’s not recommended. Depends how brave you’re feeling!

    Minh Toan

    Comment on June 1st, 2007.

    I followed every step in the instruction but after the installation, When ever I cliked the icon of Phoenix on the desktop, the programe just hanged there ( Not responding)

    Yassir Sakran

    Comment on June 2nd, 2007.

    please help me
    while i was updating my N80 the battery broke down and the phone turned off.i replaced the battery but the phone doest want to switch on.
    how can i solve the prob?
    my e-mail is yhsakran1@hotmail.com

    Paul

    Comment on June 4th, 2007.

    Does anyone know the password for the phoenix 2007 winrar file? Thanks.

    Tiago de Souza

    Comment on June 4th, 2007.

    Nokia Phoenix Service sw 2007.4.6.170
    password for file: toxiconline.com

    Paul

    Comment on June 5th, 2007.

    Thank you very much Tiago de Souza.

    Rejaul

    Comment on June 15th, 2007.

    How i setup phoenix_service_sw_2007_4_6_170.exe Please Answer. i do not have any previous version of phonix. but i have Phoenix dongel 2006 crack and Nokia Diego v3.07 Sp2

    Jampies

    Comment on June 23rd, 2007.

    Goto http://www.seventy4.co.uk/weblog/2007/02/25/download-latest-links-for-diego-and-phoenix/

    All links work. I downloaded all 21h00, 2007/06/23

    prabhas

    Comment on January 3rd, 2008.

    Can u please tell me how to get this flashing software and what is the cost for this.

    rae

    Comment on January 12th, 2008.

    can someone please upload phoenix

    karas

    Comment on February 29th, 2008.

    download files have been deleted can someone please upload on rapidshare or megaupload o something please

    panda

    Comment on March 5th, 2008.

    i really need phoenix, any leads?

    Neil

    Comment on March 13th, 2008.

    i need the site to download Pheonix and Deigo PLEASE GUYS????

    the other sites are expired

    bluekrash

    Comment on April 17th, 2008.

    GOD BLOG THANKS

    FOR PEOPLE ARE LOOKING FOR DOWNLOAD CAN USE THIS LINK http://www.rapidshare.ru/405731

    GREETING FROM CHILE!

    shuweb

    Comment on June 22nd, 2008.

    how to recover dead n80 (cable disconnected while updating). phoinex already installed, now how to use it? do i need nokia n80’s firmware file or its included in phoinex itself!?! can anybody help plz!

    tan

    Comment on July 13th, 2008.

    my n95 8gb is killed while flashing .anyobody help me please. thanx

    Manjeet Malik

    Comment on October 19th, 2008.

    check
    Nokia_Phoenix_Iinstallation_time_dongle_crack.exe
    Nokia Phoenix 2006 - Run-time dongle-crack.exe
    at
    http://www.dotsis.com/mobile_phone/showthread.php?t=39533

    Leave a comment

    Comments can contain some xhtml. Names and emails are required (emails aren't displayed), url's are optional.